The Agilent 8757D Scalar Network Analyzer has four independent
display channels that process the signals from the Agilent 85037 series precision detectors, 85025 and 85026
detectors, and the 85027 series directional bridges for logarithmic display, in single channel or ratio mode.
Three (optionally four) detector inputs are provided. The modulator drive output of the 8757D scalar analyzer
provides the circuitry to drive the 8340/50/60/70 series synthesized sweepers and the Agilent 11665B modulator.
Modulation drive may be turned on and off via the front panel or GPIB.
Agilent 8757D datasheet
Tel: +44 020 8572 5599
Fax: +44 020 8538 1899
Or Email Us
Agilent / HP |
Spectrum & Network Analyzers
Star Buys |
Test Equipment |
(All trademarks acknowledged) E. & O. E.
HP / Agilent 85037B precision detector
The Agilent / HP 85037B precision detector is designed specifically
for operation with the Agilent 8757D scalar network analyzer. These detectors may be used in either AC or DC
detection modes. For improved power measurement accuracy versus frequency, each 85037 series precision detector
includes detector specific frequency response data, stored in an internal EEPROM, which is automatically read
by the 8757D. When used in conjunction with the 8757D’s internal power calibrator (Option 002), these detectors
provide the maximum absolute power measurement accuracy.
HP / Agilent 8757D Features
- 4 display channels & 3 detector inputs
- Accurate power measurements with Agilent 85037 series precision detectors
- GPIB Interface
- Internal plotter/printer buffer
- +16 to –60 dBm dynamic range
- AC/DC detection modes
- 101 to 1601 measurement points/trace
- Noise figure measurement display capability
Ask for HP 8757D / 85037B detailed specification.