The Anritsu MS2687B Microwave Spectrum Analyzer covers a frequency
range up to 30 GHz and can measure up to 5th-order harmonics on 5-GHz Wireless LANs. Moreover, the MS2687B has
a maximum RBW of 20 MHz and is ideal for measuring the burst power of wideband signals used by Wireless LANs.
When the MX268730A Measurement Software is installed, the modulation accuracy, of each sub-carrier of the OFDM
signal can be measured at high speed and high accuracy.
High C/N ratio to securely capture adjacent signals
The MS2687B has excellent noise sideband characteristics of –108 dBc/Hz or lower (1 GHz, 10 kHz offset), which
is ideal for analyzing weak signals adjacent to strong signals or a narrow bandwidth carrier.
01 : Precision frequency reference
02 : Narrow resolution bandwidths (FFT)
04 : Digital resolution bandwidth
09 : Ethernet interface
18 : I/Q unbalanced input
21 : Power meter function
34 : 4 GHz LO output
MX268701A : W-CDMA Measurement software
MX268702A : GSM Measurement software
Anritsu MS2687B quotation today.
Tel: +44 020 8572 5599
Fax: +44 020 8538 1899
Or Email Us
Anritsu / Wiltron |
Spectrum & Network Analyzers
Star Buys |
Test Equipment |
(All trademarks acknowledged) E. & O. E.
Broad dynamic range that accurately captures weak signals
With the development of digital radio technology,
analyzed signals are becoming weaker and broader than ever. With the MS2687B, a dynamic range display of up
to 156 dB (typical value) has been achieved, thus allowing accurate analysis of even weak signals. The resolution
bandwidth of up to 20 MHz permits the analysis of broadband signals and can handle the broader bandwidths of
1 Hz resolution Built-in frequency counter
The built-in frequency counter is convenient for measuring the frequency of a signals arbitrarily selected from
multiple signals. High resolution of 1 Hz even at full span is assured.
Extremely low distortion rate suitable for power amplification or harmonic measurement
The MS2687B has extremely low harmonic distortion levels, including second harmonic distortion of –90 dBc and
two-signal third-order distortion of –85 dBc, making it suitable for evaluating the non-linearity of high-power
amplifiers and for measuring harmonics.
Anritsu MS2687B Features
- Frequency range: 9 kHz to 30 GHz
- 1 Hz resolution
- Input Level +30 to -124 dBm
- Resolution b/w 300Hz to 3MHz, 5, 10 & 20MHz
- Built-in frequency counter
- Built-in Memory Card Interface
- 6.5 inch color TFT display
Ask for Anritsu MS2687B detailed specification.