The IFR / Marconi 2032 signal generator offers increased flexibility
with combinations of frequency, phase, amplitude and pulse modulation over the frequency range 10kHz to 5.4GHz
(2032). Aeroflex 2032 is suitable for a wide variety of applications ranging from RF component characterization
to radio communications system testing. Set up time is reduced by recalling previously stored instrument settings
from the non-volatile memory. Remote programming via the GPIB is provided as a standard feature, allowing the
instruments to be included in automatic test systems.
Marconi 2032 quotation today.
Tel: +44 020 8572 5599
Fax: +44 020 8538 1899
Or Email Us
IFR / Marconi |
Signal & Sweep Generators
Star Buys |
Test Equipment |
(All trademarks acknowledged) E. & O. E.
Operation of the instrument is performed by simply selecting the required
operating mode and entering parameter values using the numeric keypad. The Signal Generator, Sweep, LF, Delta,
Memory and Utility displays are selectable at any point of operation using the keys below the screen. Within
each display, soft keys are assigned alongside the display to allow parameter entry or to select the relevant
functions. A large screen, dot matrix liquid crystal display, with backlighting, offers excellent clarity and
low power consumption. A GPIB interface is fitted as standard so that all functions are controllable over this
interface. The instruments function as talkers as well as listeners and the interface has been designed in accordance
with the IEEE 488.2 standard.
An internal modulation oscillator is provided with a frequency range
of 0.1 Hz to 500 kHz, resolved to 0.1 Hz. In addition to the normal sine wave output, alternative triangular
or square waveforms may be selected. A second oscillator (Option 01) allows full use of complex modulation modes
and is particularly useful where two tone modulation is required. Two independent BNC inputs on the front panel
allow external modulation signals to be mixed with the internal signal(s) allowing a maximum of four modulations
channels to be active at one time. The Pulse Modulation (Option 02) facility allows radar RF and IF stages to
be tested and features rise and fall times of less than 25 ns with an on/off ratio of better than 70 dB. Avionics
& DME optional facility (Option 06) provides for the internal generation modulation waveforms suitable for the
testing of Instrument Landing Systems (ILS) and VHF Omni Range (VOR) beacons. Additional modes of operation
support the testing of ADF, Marker Beacons and the SELCAL signaling system. Another additional option creates
Gaussian shaped double pulses to produce the correct DME RF signals to test DME receivers.
Marconi / IFR 2032 / 01 / 02 / 06 Features
- 10kHz to 5.4GHz, 0.1 Hz Frequency Resolution
- 0.1Hz to 500kHz Modulation Oscillator
- Wideband FM with 10MHz Bandwidth
- Signle, Dual, Composite & Dual comp. Modulation Modes
- GP-IB/IEEE Programming
- Opt 01 : 2nd Internal Modulation Oscillator
- Opt 02 : Pulse Modulation
- Opt 06 : Avionics Option (must have 01)
Ask for Marconi 2032 detailed specification.