The Fluke 732A is a solid state dV reference standard which
provides significant performance improvements in stability, ruggedness and transportability. Its 10V output
offers better resolution, lower noise and simpler operation than standard cells. The 732A also includes outputs
of 1.0 and 1.018 volts. The accuracy and stability of the 732A allows direct substitution for saturated standard
cells in many applications. Its stability of 0.5 ppm for 30 days provides the confidence necessary to calibrate
highperformance instruments. In addition, the use of the 10V output as a primary reference standard means that
the effects of thermal emfs and noise are reduced.
Fluke 732A quotation today.
Tel: +44 020 8572 5599
Fax: +44 020 8538 1899
Or Email Us
Fluke / Philips |
Star Buys |
Test Equipment |
(All trademarks acknowledged) E. & O. E.
The 732A can be shorted, even for extended periods of time, without
damage and recovers without loss of stability. The unit may be powered by line voltage or will operate 12 hours
on its internal battery - even longer on external batteries. Either line power or the battery may be removed
without affecting the output. Saturated standard cells are fragile and susceptible to shock and vibration during
traveling. The 732A Reference Standard was designed for air or ground shipment with no special handling. The
internal oven has high thermal gain allowing full accuracy to be specified over an operating range of 23°C ±5°
C. Therefore, this reference standard may be used outside of the conventional standarrls laboratory environment
in areas where saturated cells or other transfer standards would not be reliable.
Fluke 732A Features
- 10V, 1V and 1.018V outputs
- 0.5 ppm stability per month
- 18°C to 28°C operation at full accuracy specs
- Short circuit proof
- Traceable calibration available through Fluke Direct Voltage Maintenance Program to NBS
- Line and rechargeable battery powered
- 12-hour battery life for calibration transfer
Ask for Fluke 732A detailed specification.